1841 6 Pounder Cannon – 1/2 Scale

$798.00 $758.00
0 out of 5

 The Ordnance Board of 1841  drew up the design for this gun, which is one of the most common of all the artillery pieces of the Civil War. Originally a smooth bore, many were rifled to fire the James projectile, and are sometimes erroneously referred to as James Rifles. The smooth bore had certain advantages over the rifle; in the wooded terrain of the typical Civil War battlefield, range was less important than rate of fire, weight of shot, and the ability to fire canister. *Carriage not included*

Click Here to download cannon purchase agreement

1841 6 Pounder Cannon – 2/3 Scale

$1,679.00 $1,499.00
0 out of 5

 The Ordnance Board of 1841  drew up the design for this gun, which is one of the most common of all the artillery pieces of the Civil War.
*Carriage not included*

Click Here to download cannon purchase agreement

 

1841 6 Pounder Cannon – Full Scale

$3,961.00
0 out of 5

 The Ordnance Board of 1841  drew up the design for the 1841 6 pounder cannon, which is one of the most common of all the artillery pieces of the Civil War. *Carriage not included*

Click Here to download cannon purchase agreement
 

 

1857 Napoleon – 12 Pounder Full Scale

$5,232.00
0 out of 5

 The Napoleon  was commissioned by Louis Napoleon of France to replace several cannons in similar sizes. In 1857 Ames Manufacturing Company produced the first of several variations of this design. Some were made with handles, and muzzels were made both with and without a swell. *Carriage not included*

Click Here to download cannon purchase agreement

 

1857 Napoleon Cannon – 12 Pounder – 1/2 Scale

$895.00
0 out of 5

 The Napoleon  was commissioned by Louis Napoleon of France to replace several cannons in similar sizes. In 1857 Ames Manufacturing Company produced the first of several variations of this design. Some were made with handles, and muzzels were made both with and without a swell. *Carriage not included*

Click Here to download cannon purchase agreement

 

 

1861 8 inch Siege Mortar – Full Scale

$6,000.00
0 out of 5

Siege Mortars Three primary types of mortars were used during the war: siege & garrison and Coehorn mortars are also classified as siege & garrison.  While guns were intended to batter down the walls of a fortification during a siege, mortars were designed to fire explosive shells over the walls of the fortification, killing the men inside, and forcing others to stay in bombproof shelters, or preventing the gunners from serving their guns and repairing damage caused by the bombardment.

Click Here to download cannon purchase agreement

 

1861 8″ Siege Mortar – Full Scale – (Bowling Ball)

$6,000.00
0 out of 5

Hern Iron Works produces the 8″ siege mortar reproduction from the original ordnance plans. This Mortar Tube is cast with an 8-3/4″ bore to suit a bowling ball!  Weight of the tube is just over 1000#.

Click Here to download cannon purchase agreement

 

1861 8″ Siege Mortar Base – Assembled

$5,328.00
0 out of 5

The 1861 – 8″ Siege Mortar Base is recreated exactly to the original Ordinance Plans.  This is the fully assembled Base as pictured – fitted, and painted ready to use.  Weighing just over 1050#, if purchasing the Mortar tube at the same time, we will mount the tube in the base for shipment.

Click Here to download cannon purchase agreement

 

1861 8″ Siege Mortar Base – Kit

$4,717.50
0 out of 5

This Base Kit only is the un-assembled set of parts needed to completely build your own 8″ Siege Mortar Base.  All nuts, bolts, side plates, iron, steel, and ductile castings to build your base.  These are made to order, not stock parts, so plan on 8-12 weeks for delivery.  Un-painted, some finish grinding and fitting needed.  Weight: ~1050#

Click Here to download cannon purchase agreement

2.9″ Parrott Rifle – 10 Pounder – 3/4 Scale

$2,799.00
0 out of 5

 The Parrott Rifle  was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War. The gun was invented by Captain Robert Parker Parrott, a West Point graduate. He resigned from the service in 1836 and became the superintendent of the West PointFoundry in Cold Spring, New York. He created the first Parrott Rifle (and corresponding projectile) in 1860 and patented it in 1861. *Carriage not included* [

Click Here to download cannon purchase agreement

 

2.9″ Parrott Rifle – 10 Pounder – Full Scale

$4,517.00
0 out of 5

 The Parrott Rifle  was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War. The gun was invented by Captain Robert Parker Parrott, a West Point graduate. He resigned from the service in 1836 and became the superintendent of the West PointFoundry in Cold Spring, New York. He created the first Parrott Rifle (and corresponding projectile) in 1860 and patented it in 1861. *Carriage not included*

Click Here to download cannon purchase agreement

 

2.9″ Parrott Rifle – 10 Pounder – Solid – 1/4 Scale

$247.00
0 out of 5

 The Parrott Rifle  was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War. The gun was invented by Captain Robert Parker Parrott, a West Point graduate. He resigned from the service in 1836 and became the superintendent of the West PointFoundry in Cold Spring, New York. He created the first Parrott Rifle (and corresponding projectile) in 1860 and patented it in 1861. *Carriage not included*

Click Here to download cannon purchase agreement

 

X