1857 Napoleon Cannon – 12 Pounder – 1/2 Scale
$895.00The Napoleon was commissioned by Louis Napoleon of France to replace several cannons in similar sizes. In 1857 Ames Manufacturing Company produced the first of several variations of this design. Some were made with handles, and muzzels were made both with and without a swell. *Carriage not included*
Click Here to download cannon purchase agreement
1861 8 inch Siege Mortar – Full Scale
$6,000.00Siege Mortars Three primary types of mortars were used during the war: siege & garrison and Coehorn mortars are also classified as siege & garrison. While guns were intended to batter down the walls of a fortification during a siege, mortars were designed to fire explosive shells over the walls of the fortification, killing the men inside, and forcing others to stay in bombproof shelters, or preventing the gunners from serving their guns and repairing damage caused by the bombardment.
Click Here to download cannon purchase agreement
1861 8″ Siege Mortar – Full Scale – (Bowling Ball)
$6,000.00Hern Iron Works produces the 8″ siege mortar reproduction from the original ordnance plans. This Mortar Tube is cast with an 8-3/4″ bore to suit a bowling ball! Weight of the tube is just over 1000#.
Click Here to download cannon purchase agreement
1861 8″ Siege Mortar Base – Assembled
$5,328.00The 1861 – 8″ Siege Mortar Base is recreated exactly to the original Ordinance Plans. This is the fully assembled Base as pictured – fitted, and painted ready to use. Weighing just over 1050#, if purchasing the Mortar tube at the same time, we will mount the tube in the base for shipment.
Click Here to download cannon purchase agreement
1861 8″ Siege Mortar Base – Kit
$4,717.50This Base Kit only is the un-assembled set of parts needed to completely build your own 8″ Siege Mortar Base. All nuts, bolts, side plates, iron, steel, and ductile castings to build your base. These are made to order, not stock parts, so plan on 8-12 weeks for delivery. Un-painted, some finish grinding and fitting needed. Weight: ~1050#
Click Here to download cannon purchase agreement
2.9″ Parrott Rifle – 10 Pounder – Full Scale
$4,517.00The Parrott Rifle was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War. The gun was invented by Captain Robert Parker Parrott, a West Point graduate. He resigned from the service in 1836 and became the superintendent of the West PointFoundry in Cold Spring, New York. He created the first Parrott Rifle (and corresponding projectile) in 1860 and patented it in 1861. *Carriage not included*
Click Here to download cannon purchase agreement
2.9″ Parrott Rifle – 10 Pounder – Solid – 1/4 Scale
$247.00The Parrott Rifle was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War. The gun was invented by Captain Robert Parker Parrott, a West Point graduate. He resigned from the service in 1836 and became the superintendent of the West PointFoundry in Cold Spring, New York. He created the first Parrott Rifle (and corresponding projectile) in 1860 and patented it in 1861. *Carriage not included*
Click Here to download cannon purchase agreement
Coehorn Mortar 12 Pounder – Full Scale – 2 1/4″ Bore
The shot that opened the Civil War was fired from a mortar. The Coehorn Mortar was a very useful piece, for it was developed in the 16th century, and there were still a few in use in British colonial garrisons in the 1920’s. *Carriage not included*
Click Here to download cannon purchase agreement
Coehorn Mortar Base – Hardware kit & Plans
$339.00Hardware Kit & Plans to outfit your Coehorn Mortar! Used with the 2-1/4″ OR 3″ bore tubes.
Click Here to download cannon purchase agreement